Welcome to the world of Saab ! Register
Results 1 to 2 of 2
  1. #1

    Join Date
    15 Jan 2019
    Location
    Houston ,TX
    Posts
    3
    Saab(s)
    2000 9-3 Convertible 205R
    Thumbs Up:   0

    Timing Chain Noise, Sounds on the Valve Cover.

    Hi Y'all
    I have a 2000 9-3 Convertible with the 205R engine and I have been trying to figure out a noise.
    It sounds on the front of the engine and specifically by the valve cover.
    Like a slap of the chain between the two sprockets. It has a new tensioner, but when I removed the valve cover and push on the middle of the two sprocket on the chain...it does deflect. This is the second tensioner installed.
    Background.
    According to the paperwork provided by the previous owner...
    Timing chains , both primary and secondary have been replaced. New guides and original primary chain tensioner.
    It was destroyed. The Teeth wore thrue. So it would not lock in place.
    The guides and chain look new. The only guide that looks old is the one located on the valve cover..but it does not look damaged or worn out. Its smooth and ok.

    The advice i am asking:
    Would you know where I can get a better tensioner, or perhaps a different setup.
    IF its normal that the chain can deflect between sprockets by pushing on it with my finger..not too much force exerted.

    Side note.
    When I want to start...its usually has an extended crank.. Replaced Fuel pump asm. Was not strong enough. Check valve is ok.
    Thank you.
    I really want to fix this Saab so I can have this rare car over here..the convertible top is next..

    Thanks for the help in advance.

    0 Not allowed!

  2. #2
    Dave
    Saab Enthusiast
    Join Date
    25 Oct 2014
    Location
    Nottinghamshire, England
    Posts
    121
    Saab(s)
    2001 93 2.0Ltr HOT Aero coupe & 2011 1.9TTiD Aero saloon
    Thumbs Up:   1
    Hi
    Many if not all your queries or questions may be answered in the link below
    http://www.serioussaab.co.uk/main_pages/site_map.html

    This site has been a god send to me as a total 205 repair virgin.
    I've since replaced the oil sump strainer mesh. timing chain,sprockets and tensioner. balance shaft chain and sprockets . All guides, oil pump and various seals, gaskets, breather pipe mods and vacuum pipes and much more, All to the conclusion of turning the key and the engine running again nicely.

    Hope this helps
    Dave

    0 Not allowed!

 

 

Similar Threads

  1. Timing chain setting
    By stugufors in forum Saab 9-5 (2010-2012)
    Replies: 0
    Last Post: 21 December 2015, 12:17
  2. Timing chain 9-5 Turbo6
    By Markusson in forum Saab 9-5 (2010-2012)
    Replies: 2
    Last Post: 13 June 2015, 22:52
  3. Timing Chain
    By mgcassidy in forum Saab 900 and 9-3 (1994-2003)
    Replies: 0
    Last Post: 20 July 2013, 15:31
  4. Replies: 3
    Last Post: 10 December 2011, 03:11
  5. Timing chain / balancer chain (in car) - Saab 9-5
    By SaabWorld in forum Tutorials, repairs and service
    Replies: 0
    Last Post: 02 November 2010, 12:55

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT. The time now is 15:07.
Powered by vBulletin® Version 4.2.5
Copyright © 2019 vBulletin Solutions Inc. All rights reserved.