Results 1 to 3 of 3
-
08 June 2019 #1
- Join Date
- 21 Aug 2010
- Location
- Williamsburg, Va. and Cedar River Mi.
- Posts
- 638
- Saab(s)
- 01 95 Aero and Wagon, 09 93 Combi and an 08 95 Combi
Cant get passanger side wiper arm to reattach to the shaft
09 9 3. I had to remove the wiper arms to replace the assembly when the bushings failed. Installed the wiper arms and tightened them down.
The problem is that the passanger side wont attach. Have removed it twice and reattached but it still wont set into the shaft. The shaft nor the arm is stripped.
Is there a trick to this? The shaft is rotating fine so that's not the problem, just cant seem to get the arm down far enough on the shaft.
-
10 June 2019 #2
- Join Date
- 21 Aug 2010
- Location
- Williamsburg, Va. and Cedar River Mi.
- Posts
- 638
- Saab(s)
- 01 95 Aero and Wagon, 09 93 Combi and an 08 95 Combi
The arm turned on the shaft stripping it. I will have to get another arm. Oh well.
-
11 June 2019 #3
Frank Administrator
- Join Date
- 30 Jul 2010
- Location
- USA - Netherlands
- Posts
- 7,901
- Saab(s)
- previous: 2006 9-3, 2001-06 9-5, 2011 9-4X
Hope the arm won't cost an arm and a leg..
Probably shouldn't be too difficult to find a used arm.
Similar Threads
-
Front air dam pulled loose; reattach??
By Aero51 in forum Saab 9-3 (2003-2014)Replies: 4Last Post: 08 October 2018, 22:47 -
3.0l cam shaft's
By Glen in forum Saab 9-5 (1998-2009)Replies: 0Last Post: 29 April 2017, 01:20 -
CV JOINT (HALF-SHAFT)
By inergen in forum Saab 9-3 (2003-2014)Replies: 0Last Post: 06 October 2012, 00:06 -
Balance shaft seizure
By cammo in forum Saab 9-5 (1998-2009)Replies: 5Last Post: 20 July 2012, 14:30 -
driver side window and left side electrics failing in sequence...???
By dromos in forum Saab 9-3 (2003-2014)Replies: 5Last Post: 28 December 2011, 21:21