Results 1 to 2 of 2
-
01 June 2019 #1
Chris
- Join Date
- 01 Jun 2019
- Location
- Blackwood, Wales
- Posts
- 1
- Saab(s)
- Saab 9-3 TTDi 2011
Ripped OBD male connector off in fit of rage
I have a 9-3 TTDi (2011) and had front parking sensors fitted. The cable went behind the plastic moulding behind the pedals (manual car) and was not fitted back properly. As it would occasional get stuck over the clutch which was really dangerous, I decided to rip it out and get another one fitted.
Unfortunately I also pulled the OBD connector off it’s wires.
Is there a part with the OBD, the wiring loom and connector? I can’t find one.
I desperately need to get the car serviced and they’ll need to access the diagnostics.
Any help or advice would be greatly appreciated.
chris
-
02 June 2019 #2
Geoffrey Storey Saab Enthusiast
- Join Date
- 28 Oct 2013
- Location
- Stockton on tees England
- Posts
- 165
- Saab(s)
- 2000 9-3 viggen convertible
I see you live in Wales. Join the uksaabs forum and there’s a few people on there that sell parts.
http://www.uksaabs.co.uk/UKS/
Similar Threads
-
2 pole connector in engine bay (out of wiring harness) with no mating connector
By albo646 in forum Saab 9-3 (2003-2014)Replies: 2Last Post: 23 August 2019, 18:31 -
H43-1 connector location
By ozkarsli in forum Saab 9-5 (1998-2009)Replies: 2Last Post: 08 June 2015, 08:52 -
Ad Campaigns Ripped From Old Saab Ad Campaigns
By zmhcreative in forum Saab TalkReplies: 9Last Post: 12 August 2013, 22:47 -
What is the AS1 HEAD UNIT CONNECTOR
By Mike Brennan in forum Saab 9-5 (1998-2009)Replies: 7Last Post: 23 July 2013, 17:12 -
o2 sensor connector question.
By t1adler in forum Saab 9-5 (1998-2009)Replies: 1Last Post: 20 November 2012, 01:37