Results 11 to 14 of 14
-
21 November 2019 #11
- Join Date
- 18 Nov 2019
- Location
- Washington
- Posts
- 14
- Saab(s)
- 2000 9-5 Aero
Dimensions of this wooden "stethescope"???
-
22 November 2019 #12
-
22 November 2019 #13
- Join Date
- 13 Jun 2019
- Location
- Colorado
- Posts
- 112
- Saab(s)
- 1999 9-5 wagon
I happened to have a scrap that was roughly 1 inch by 3/4 inch and about 2 or 3 feet long. But anything will work. The noise vibration will travel along whatever you use. Long screwdriver, scrap of wood, scrap piece of conduit. Whatever you got handy.
-
24 November 2019 #14
- Join Date
- 29 Sep 2019
- Location
- Massachusetts
- Posts
- 7
- Saab(s)
- 03 9-5 2.3
Thanks for all the replies!
Yesterday I just started tearing the thing apart looking for a leak in the intake where I could hear hissing. The intake manifold gasket was completely gone around cylinder 4! I don't know why, maybe got eaten away by coolant from my leaky heater core valve? Anyway, I have a new gasket and will install tomorrow. Then I guess I'll check the valves for a bunch of shrapnel once I've got everything else back together.
Similar Threads
-
Misfire at High Turbo Boost on a Single Cylinder - but coils/plugs OK
By dscrofani in forum Saab 9-3 (2003-2014)Replies: 1Last Post: 05 August 2020, 05:50 -
2006 9-3 V6 engine misfire cylinder bank 2
By db2901 in forum Saab 9-3 (2003-2014)Replies: 0Last Post: 12 March 2019, 13:17 -
Misfire cylinder 4
By Zzzz3333 in forum Saab 9-3 (2003-2014)Replies: 0Last Post: 01 December 2014, 00:30 -
Cylinder 4 misfire, or is it?
By D1n60 in forum Saab 9-3 (2003-2014)Replies: 1Last Post: 13 March 2013, 11:41 -
'03 9-5 2.3T 4 cylinder / MIsfire Solution / fixed
By photousa in forum Saab 9-5 (1998-2009)Replies: 3Last Post: 03 January 2013, 20:30