Saab 9-5 2.3t "n/a" error code

[Hammy]

My CEL came on this morning, so I whipped out the OBD scanner and it tells me I have 1 DTC. Scroll down to read what it is, expecting maybe p1134 or p1312. To my surprise, it says "n/a". Anybody had this before or have any idea what it could be?

[Digger]

Basic OBD code readers only read standard powertrain codes, all manufactures have specific codes that require specific code set and Saab has a lot of them. Also most late model cars loght the engine light for non powertrain problems that are not standard OBD and not readable by standard OBD2 readers.

[Hammy]

To the local indy, then?

[Digger]

To the local indy, then?

If its a hard code that would be the next best step, but there are lots of soft codes that will clear themselves if the problem doesn't reoccur within a set number of drive cycles. Before spending money on the indy, pull the battery cable to reset everything and find out if this is a phantom fault or real error message.