Results 1 to 2 of 2
-
30 November 2020 #1
- Join Date
- 27 Jan 2016
- Location
- Port Elizabeth, Eastern Cape South Africa
- Posts
- 22
- Saab(s)
- 2005 9-5 Aero, prior to the 9-5 had a 9000CS that had been tweaked by Abbott Racing in the UK
SAAB 95 MY05 Auto Connectors/wiring on top of auto transmission
Please see photo below, what is the cable/connector, circled in blue, next to the ‘gear selector position sensor’ has it got anything to do with the ‘gear selector position sensor’?
Please see photo below, this cable/connector, circled in red, is quite close to the ‘gear selector position sensor’. I presume it is either the ‘input shaft speed sensor’ or the ‘output shaft speed sensor’?
Please see photo below, this cable/connector, circled in green, is on top of the gearbox near the back when you are looking at it from the front of the car. Again, I presume it is either the ‘input shaft speed sensor’ or the ‘output shaft speed sensor’?
Thank you.
-
13 December 2020 #2
- Join Date
- 06 Nov 2011
- Location
- Smyrna TN
- Posts
- 65
- Saab(s)
- 2007 9-5 Aero Sport Combi
The green and red, yes those are the input and output speed sensors. The one closest to the front of the car is the input.
The first circled harness passes through the tranmission case and is the harness for the shift solenoids in the transmission. It is not related to the range switch right next to it.
Similar Threads
-
1992 SAAB 9000 CD 2.3T with Auto Transmission. Speedo not working
By rociero in forum Saab 9000 (1985-1998)Replies: 0Last Post: 30 May 2018, 06:45 -
auto transmission fault codes. what to do next?
By tjeroen90 in forum Saab 900 and 9-3 (1994-2003)Replies: 1Last Post: 18 August 2016, 07:30 -
Transmission Fluid for Saab 2004 95 auto 4cyl
By Chazmatic in forum Saab 9-5 (1998-2009)Replies: 8Last Post: 27 January 2015, 00:46 -
Auto transmission - slipping from 2nd to 3rd gear
By juan in forum Saab 9-3 (2003-2014)Replies: 5Last Post: 24 March 2012, 05:50 -
how to replace auto-transmission oil (B284) AT
By jlrSAAB in forum TutorialsReplies: 1Last Post: 06 December 2010, 11:35