Welcome to the world of Saab ! Register
Results 1 to 5 of 5
  1. #1
    Saab Fan
    Join Date
    08 Nov 2019
    Location
    Norway
    Posts
    6
    Saab(s)
    9-5 vector sport 2006

    P1901 Exhaust pressure sensor front hose blocked or loose

    Saab 9-5 sport Vector 2006 1.9tid.

    Hi,
    I have this faultcode that just wont go away. P1901-F. It says; Exhaust pressure sensor front hose blocked or loose. But what exactly is "front hose"? I am guessing it is the ONE hose that goes from the dpf to the dpf presseure sensor in the enginebay that sits on the firewall. But is this correct?

    I had a minor leakage from turbo-exhaust coupling but that was due to a damaged gasket. Got that fixed today and thought that was the "loose" hose that made the pressure sensor spit out a fault code, but apparently not. Please help. Both dpf and sensor was changed about 5 months ago

  2. #2
    Dave T.
    Super Moderator Dave T's Avatar
    Join Date
    03 Aug 2010
    Location
    near Seattle, Washington
    Posts
    1,515
    Saab(s)
    1999 9-3SE (2013-2015), 2005 9-3 (2005-2013), 1990 900 (1990-2003)
    ?

  3. #3
    Saab Fan
    Join Date
    08 Nov 2019
    Location
    Norway
    Posts
    6
    Saab(s)
    9-5 vector sport 2006
    The question is: what is the 'front hose' in the referenced fault code.

  4. #4
    Saab Enthusiast
    Join Date
    13 Jun 2019
    Location
    Colorado
    Posts
    112
    Saab(s)
    1999 9-5 wagon
    Found this on another site... Something about 5 subcategories relating to that "p1901" code...

    "p1901......

    02 dpf pressure sensor short to ground
    05 dpf pressure sensor open/short circuit to B+
    58 dpf blocked or front hose loose
    75 dpf blocked
    0F dpf plausibility for with manifold absolute pressure (map sensor)"

    Perhaps the "F" in what you had posted relates to that map sensor.

    I dont know for sure but maybe that helps you?

  5. #5
    Saab Fan
    Join Date
    08 Nov 2019
    Location
    Norway
    Posts
    6
    Saab(s)
    9-5 vector sport 2006
    Dont know, the fault code reader specified the exhaust pressure sensor, but i cannot see or feel any leaks, and the hose that runs from the dpf to dpf P. Sensor i not blocked or loose so i dont believe it's that. I can't seem to find any info on this

 

 

Similar Threads

  1. Oil Pressure Switch / Sensor replacement notes/tutorial
    By photousa in forum Tutorials, repairs and service
    Replies: 8
    Last Post: 25 September 2020, 02:46
  2. Front air dam pulled loose; reattach??
    By Aero51 in forum Saab 9-3 (2003-2014)
    Replies: 4
    Last Post: 08 October 2018, 22:47
  3. Replies: 2
    Last Post: 06 December 2013, 07:30
  4. Disconnected sensor and a loose wire. IS this right??
    By Nathan 9⁵ in forum Saab 9-3 (2003-2014)
    Replies: 3
    Last Post: 30 July 2012, 00:56
  5. P0106 - Manifold Absolute Pressure Sensor Circuit
    By SaabWorld in forum Diagnostics and documentation
    Replies: 0
    Last Post: 11 February 2012, 17:45

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT. The time now is 06:07.
Powered by vBulletin® Version 4.2.5
Copyright © 2024 vBulletin Solutions Inc. All rights reserved.