Results 1 to 1 of 1
-
02 April 2021 #1
- Join Date
- 18 Jul 2013
- Location
- USA
- Posts
- 55
- Saab(s)
- 2003 Saab 9-3 linear
2.0t oil pan removal
hey guys, I recently did headgasket, timing chain, and water pump on my 9-3 linear. Im just happy I didnt mess the timing up on my 9-3 like I did on my 9-5 . well almost all the leaks are gone and the motor is happy, only leak I have left is from the oil level sensor. I just wanted to run it by and see if anyone has dropped their oil pan in their 2.0 and has any advice and how well it went seeing as I cant find any info on WIS for this. I need to know if their is a gasket or if I have to use something like rtv gasket maker when I go to reinstall it. do I have to remove motor mounts? its been a minute since I have been under car so dont remember what it looks like under there but I have a new exhaust system on the way so I figured I would kill two birds with one stone while Im under the car. I appreciate any advice.
Similar Threads
-
Sub-woofer removal instructions
By Polestar in forum Saab 9-5 (1998-2009)Replies: 3Last Post: 13 January 2019, 22:19 -
ac compressor removal
By greenie 00 9 5 kombi in forum Saab 9-3 (2003-2014)Replies: 1Last Post: 18 April 2018, 06:40 -
pcv trap removal
By octoberjack in forum Saab 9-5 (1998-2009)Replies: 2Last Post: 30 July 2016, 14:29 -
washer arm removal
By rjl01wgn in forum Saab 9-5 (1998-2009)Replies: 5Last Post: 02 March 2016, 18:01 -
Rear caliper removal?
By mmc in forum Saab 9-3 (2003-2014)Replies: 0Last Post: 20 September 2014, 22:24