Results 1 to 1 of 1
-
08 January 2024 #1
- Join Date
- 02 Aug 2023
- Location
- Porto, Portugal
- Posts
- 3
- Saab(s)
- SAAB 95 SW 1.9 TiD; SAAB 93 SW 1.9 TTiD
crankcase ventilation Z19DTH
Dear SAAB enthusiasts,
I have the crankcase ventilation line of my SAAB 9-5 SW 1.9 TiD full of oil spray. So, it seems to me that the solution is to replace the separator and its hoses.
I was searching in internet and I can find much more affordable Fiat parts on ebay. Knowing that the 1.9 turbo diesel engine is the same, are the parts compatible?
Someone can help me?
The separator, according to the EPC, should be 93179199 or 55217793 (NLS) - this has the same part number, but is from Fiat: https://www.ebay.co.uk/itm/314537033656.
The same goes for this tube (SAAB part number 93179200): https://www.ebay.co.uk/itm/125947599052.
And with this one (SAAB part number 55209237): https://www.ebay.co.uk/itm/125879922206.
Are they compatible? By the way, the car is from 2006 and the engine number is less than 17242685.
And... by the way... replacing these parts is a difficult task or can be done by a careful curious person...
Obviously, more tips are very welcome!
Similar Threads
-
High Crankcase Pressure
By Jcgonzal in forum Saab 9-5 (1998-2009)Replies: 4Last Post: 14 July 2020, 14:27 -
Crankcase ventilation kit - PCV #6 - Saab 9-5
By SaabWorld in forum Tutorials, repairs and serviceReplies: 14Last Post: 17 May 2019, 02:25 -
Oil Trap Hose Crankcase Connector Broke Off
By Queen in forum Saab 9-5 (1998-2009)Replies: 2Last Post: 15 May 2019, 12:48 -
Crank case ventilation update with valve cover service
By jchang in forum Saab 9-5 (1998-2009)Replies: 21Last Post: 10 November 2013, 22:43