0

Thumbs Up: |   3 |
I am having problems with my system. No water in the oil, oil coming out of the oil filler hole, when open, puffs of white smoke. Dripping oil from the oil filler. Sounded like a valve that is stuck. Havent found it yet. Oily number 1 plug. Ran great, then started to miss. And ideas on this problem? I changed a broken valve, it was a pain to monkey it into the hard plastic line. Any help is good. Thanks
Thumbs Up: |   0 |
OK Help
I have done all that replaced everything
my problem is oil is traveling along the entire system from the tee join to the inlet manifold
yes the rubber glove still balloons as well
strange the vehicle has great power and does not smoke
until once removes one of the pvc pipes
I replaced the turbo as people told me the smoke was oil coming past the innner
Thumbs Up: |   1 |
I think your PVC system is plugged. Or at least part of it.
I'd start cleaning check valves and hoses. Its kind of a pain in the a... To take the PVC tank off the back of the block. (tip) loosen the altinator to get at the one pvc bolt.
There is a kit available from eeuro or others.
Marty
Thumbs Up: |   0 |
questiomnas stated i fully replaced the entire pvc system, except the tank and tahts just a plastic container
but I blew out the system
question the bottom pipe from the small tank does that go to the sump below the fill line as when i blow the pipe from the rocker cover to the tank it sounds like it pushes oil about in the sump
I would have thought it would be above the oil
Thumbs Up: |   1 |