Welcome to the world of Saab ! Register
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Closet Intellectual Pali7's Avatar
    Join Date
    15 Nov 2013
    Location
    Palisade, Colorado
    Posts
    70
    Saab(s)
    2005 9-5 ARC
    Thumbs Up:   3
    I am having problems with my system. No water in the oil, oil coming out of the oil filler hole, when open, puffs of white smoke. Dripping oil from the oil filler. Sounded like a valve that is stuck. Havent found it yet. Oily number 1 plug. Ran great, then started to miss. And ideas on this problem? I changed a broken valve, it was a pain to monkey it into the hard plastic line. Any help is good. Thanks

    0 Not allowed!

  2. #12
    Saab Fan
    Join Date
    04 Dec 2014
    Location
    australia
    Posts
    43
    Saab(s)
    2001 9-5 2.3
    Thumbs Up:   0
    OK Help
    I have done all that replaced everything

    my problem is oil is traveling along the entire system from the tee join to the inlet manifold

    yes the rubber glove still balloons as well

    strange the vehicle has great power and does not smoke
    until once removes one of the pvc pipes

    I replaced the turbo as people told me the smoke was oil coming past the innner

    0 Not allowed!

  3. #13
    Marty Jackson
    Saab Addict Finding41's Avatar
    Join Date
    17 May 2013
    Location
    London Ont. Canada
    Posts
    639
    Saab(s)
    Sadly a Volvo XC90
    Thumbs Up:   1
    I think your PVC system is plugged. Or at least part of it.
    I'd start cleaning check valves and hoses. Its kind of a pain in the a... To take the PVC tank off the back of the block. (tip) loosen the altinator to get at the one pvc bolt.
    There is a kit available from eeuro or others.
    Marty

    0 Not allowed!

  4. #14
    Saab Fan
    Join Date
    04 Dec 2014
    Location
    australia
    Posts
    43
    Saab(s)
    2001 9-5 2.3
    Thumbs Up:   0

    thanks

    questiomn
    Quote Originally Posted by Finding41 View Post
    I think your PVC system is plugged. Or at least part of it.
    I'd start cleaning check valves and hoses. Its kind of a pain in the a... To take the PVC tank off the back of the block. (tip) loosen the altinator to get at the one pvc bolt.
    There is a kit available from eeuro or others.
    Marty
    as stated i fully replaced the entire pvc system, except the tank and tahts just a plastic container
    but I blew out the system

    question the bottom pipe from the small tank does that go to the sump below the fill line as when i blow the pipe from the rocker cover to the tank it sounds like it pushes oil about in the sump
    I would have thought it would be above the oil

    0 Not allowed!

  5. #15
    Saab Enthusiast
    Join Date
    21 Mar 2015
    Location
    Charlotte, NC
    Posts
    58
    Saab(s)
    2004 Saab 9-5 Arc Wagon
    Thumbs Up:   1
    Quote Originally Posted by xenon View Post
    questiomn

    as stated i fully replaced the entire pvc system, except the tank and tahts just a plastic container
    but I blew out the system

    question the bottom pipe from the small tank does that go to the sump below the fill line as when i blow the pipe from the rocker cover to the tank it sounds like it pushes oil about in the sump
    I would have thought it would be above the oil
    Hi,

    I plan to replace the oil trap kit but I need some guidance. First I want to be sure I have the right part #21341200 for my 2004 Saab 9-5 Arc Wagon, and I'd like to know if I pull the oil trap out from the under the car.

    Thanks,

    Queen

    0 Not allowed!

 

 

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT. The time now is 23:16.
Powered by vBulletin® Version 4.2.5
Copyright © 2019 vBulletin Solutions Inc. All rights reserved.