Results 1 to 8 of 8
-
31 October 2012 #1
Jeffrey Master SaabTech/Moderator
- Join Date
- 25 Oct 2010
- Location
- Point Pleasant, PA
- Posts
- 1,317
- Saab(s)
- - 86' 9KT - 95' 9K Custom CS - 06' 9-3 Combi - 07' 9-7X Arc - 08' 9-3 Convertible - 08' 9-3 TurboX -
2002-2005 9-5 XENON/HID TECH2 Settings - Anyone know them?
I have a 2003 9-5 with those lame Xenon's - and I have a Tech2 @ work (Saab Dealer) and I was curious if ANYONE has done or know how to set the Halogen High Beams to work WITH the FULL HID's at the same time. I was told there is a way - but I have not figured it out yet. I already have the lights set to full Euro mode. That part is easy.
Thanks!
Also - any one got Bulb suggestions for higher output from this lame lights? I am convinced the halogen lights on our 2001 wagon were much nicer and brighter.European Motor Services, LLC - Point Pleasant, PA 18950 - www.europeanmotorsvc.com
-
01 November 2012 #2
Frank Administrator
- Join Date
- 30 Jul 2010
- Location
- USA - Netherlands
- Posts
- 7,903
- Saab(s)
- previous: 2006 9-3, 2001-06 9-5, 2011 9-4X
Are you talking about this mod? Relay 666 Headlight mod - The Saab Link Forums
If you do this on your car, please write some instructions in the tutorial forum in case you do anything different.
I always found the HIDs on my 2004 and 2005 9-5 to have excellent light output. I would stick with Philips or Osram for new xenon bulbs, they are the best quality.
-
01 November 2012 #3
Jeffrey Master SaabTech/Moderator
- Join Date
- 25 Oct 2010
- Location
- Point Pleasant, PA
- Posts
- 1,317
- Saab(s)
- - 86' 9KT - 95' 9K Custom CS - 06' 9-3 Combi - 07' 9-7X Arc - 08' 9-3 Convertible - 08' 9-3 TurboX -
That may indeed be what I have to do. I will look into that and if I do it I'll post pictures!
European Motor Services, LLC - Point Pleasant, PA 18950 - www.europeanmotorsvc.com
-
03 November 2012 #4
- Join Date
- 17 Aug 2011
- Location
- Honeoye Falls, NY
- Posts
- 395
- Saab(s)
- 2011 9-3 Aero XWD Performance by Hirsch
Jeff, the relay mod is one option, I did it to my father's car and on my '04, I added in the factory extra light kit, that has a dash switch and a relay which I wired into those halogen bulbs and are active when the high beams are switched on.
2011 Saab 9-3 Aero XWD Performance by Hirsch "Wolffe"
-
06 November 2012 #5
Jeffrey Master SaabTech/Moderator
- Join Date
- 25 Oct 2010
- Location
- Point Pleasant, PA
- Posts
- 1,317
- Saab(s)
- - 86' 9KT - 95' 9K Custom CS - 06' 9-3 Combi - 07' 9-7X Arc - 08' 9-3 Convertible - 08' 9-3 TurboX -
Brad -
Any idea of the part number or source for this "kit?" I'd be interested in doing it right - but again I will try the cheap way first.European Motor Services, LLC - Point Pleasant, PA 18950 - www.europeanmotorsvc.com
-
06 November 2012 #6
- Join Date
- 17 Aug 2011
- Location
- Honeoye Falls, NY
- Posts
- 395
- Saab(s)
- 2011 9-3 Aero XWD Performance by Hirsch
P/N is 400107322, not sure how availability is. I bought two kits out of Sweden a while back, put one in the car and the other went into storage.
2011 Saab 9-3 Aero XWD Performance by Hirsch "Wolffe"
-
06 November 2012 #7
- Join Date
- 17 Aug 2011
- Location
- Honeoye Falls, NY
- Posts
- 395
- Saab(s)
- 2011 9-3 Aero XWD Performance by Hirsch
Speed Parts has it for reasonably cheap: Speedparts Sweden - Monteringssats Extraljus
2011 Saab 9-3 Aero XWD Performance by Hirsch "Wolffe"
-
06 November 2012 #8
Jeffrey Master SaabTech/Moderator
- Join Date
- 25 Oct 2010
- Location
- Point Pleasant, PA
- Posts
- 1,317
- Saab(s)
- - 86' 9KT - 95' 9K Custom CS - 06' 9-3 Combi - 07' 9-7X Arc - 08' 9-3 Convertible - 08' 9-3 TurboX -
OK - made the jumper harness and took pictures. Works well in the daylight so far - will know how well it works going home tonight in the dark. I will post up a "how to" later when @ home.
European Motor Services, LLC - Point Pleasant, PA 18950 - www.europeanmotorsvc.com