Results 1 to 8 of 8
-
08 June 2013 #1
- Join Date
- 07 Jun 2013
- Location
- Dayton, Ohio
- Posts
- 5
- Saab(s)
- 1996 Saab 900S
1996 Saab 900S won't start
My car was running great. Came out in the morning to go to work & she won't start. I have replaced the fuel pump & filter, evap sensor & cam sensor. If I bypass the evap sensor it will run around 10 min then stop. Any suggestions?
-
10 June 2013 #2
Mike Moderator
- Join Date
- 30 Jul 2010
- Location
- Rochester, New York, USA
- Posts
- 1,985
- Saab(s)
- Saab-less
Anyway you can get a reading of your fuel pressure?
Does she crank over at all?Free SaabWorld Stickers
"Sometimes it is better to travel than it is to arrive." - Robert Pirsig
-
10 June 2013 #3
- Join Date
- 07 Jun 2013
- Location
- Dayton, Ohio
- Posts
- 5
- Saab(s)
- 1996 Saab 900S
It will crank. Just wont kick over & start. Ill have my son Inlaws check fuel pressure.
-
04 July 2013 #4
- Join Date
- 04 Jul 2013
- Location
- Holland
- Posts
- 8
- Saab(s)
- 900 NG
crankshaft position sensor?
-
05 July 2013 #5
- Join Date
- 07 Jun 2013
- Location
- Dayton, Ohio
- Posts
- 5
- Saab(s)
- 1996 Saab 900S
Crank shaft was replaced. Fuel pressure not started is 1.5. Was wondering if it could be ignition? For about a week befor no start the key was sticking & I had to juggle it to get started at times.
-
06 September 2013 #6
- Join Date
- 07 Jun 2013
- Location
- Dayton, Ohio
- Posts
- 5
- Saab(s)
- 1996 Saab 900S
Since I had replaced the fuel pump we were stumped. So finally got the test & come to find out it was the fuel pump assembly.
-
17 September 2013 #7
See if you can find a replacement DI Cassette and check that as well.
-
17 September 2013 #8
- Join Date
- 07 Jun 2013
- Location
- Dayton, Ohio
- Posts
- 5
- Saab(s)
- 1996 Saab 900S
Had test run & come to find out it is the fuel pump assembly :-(. I had replaced fuel pump. So here I go :-)