so I have a leak in my AC system it was the o-ring on the low pressure side on the compressor I've got the o-rings I ordered a receiver drier the o-rings don't seem a big issue to replace on the compressor I've got everything apart I'm having issues getting the dryer out there's a little clamp that goes around the dryer and its a Phillips head screwdriver that loosens the clamp and I cannot get that clamp off any suggestions would be greatly appreciated I'm wondering why she just cut it and try to find a new bolt but I don't know of a way to get you off there and less is to other both connecting it to the evaporator that I'm trying to get loose set the only option I can see if anyone has ideas let me know