Red Aero 2005 Polk Audio+ Eton

[Nickolay]

Hi all. My new victim



Components

Front Speakers Polk Audio MM 6501

Subwoofer Polk Audio MM 1040

Amplifier front speakers Eton ECC500.4

Amplifier Subwoofer Eton ECC320.2

Getting Started with built subwoofer box. For use 18mm plywood, silicone sealant and a bucket of screws.

After some measurements, are beginning to build a box




Trying on a box in the trunk and choosing the location, note the border with paper tape

[Nickolay]

Sub box



amplifiers will be placed on each side of the subwoofer .

Building a walls for amplifiers




Before operation, amplifiers cover a paper tape. not to scratch the front surface is made from black plastic

[Nickolay]

Amplifiers will be attached to the walls «Z» - shaped steel strips




On the wall to place the subwoofer amp crossovers for front acoustics

[Nickolay]

The walls are attached to the box subwoofer with M6 bolts





in the trunk

[Nickolay]

The border of the subwoofer and the walls of the blind fold carpet luggage, that is to get spare wheel will be problematic. Solving this problem thus:

remove the black cloth on the back of the carpet (not removed very easily, but removing)

It is necessary to free some plywood floor


Measures off the required distance and saw off

to ensure free movement at the bend, saw off an additional 1 cm from the narrow part

[Nickolay]

Putting floor back and glue a black cloth




Now you can get a spare wheel

Walls covered with carpets and a subwoofer, and begin to collect and connect

[Nickolay]

All is fixed to the body 8 steel corners (4 on the subwoofer and 2 pieces on each wall)

[Nickolay]

still collect and connect ...




Finally collected and connected...
view from the cockpit


from the trunk (cleaned))

[Nickolay]

And this is again a view from the salon, but with a gathered back seat



View from the closed trunk

[Nickolay]

midbass in door (after sound deadening of course )





Tweeters placed under windshield.

thats all